Compositions
The number of micrographs for each composition is given in [brackets]. Click on a
composition for a list of micrographs for the composition. A link (
)
is provided to the corresponding phase diagram for binary alloy systems. Alternatively,
browse the Library.
A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
- Aggregate, cement, water
- Al 10, Cu 90 (wt%)
- Al 15, Sn 85 (wt%)
- Al 64, Cu 36 (wt%)
- Al 67, Cu 33 (wt%)
- Al 75, Cu 25 (wt%)
- Al 88, Si 12 (wt%)
- Al 90, Mg 10 (wt%)
- Al 95, Cu 5 (wt%)
- Al 96, Cu 4 (wt%)
- Al, Cu 4.5, Mg 1.5 (wt%)
- Al, Fe 0.5, Mn 1.0 / Al, Si 1.0 (wt%)
- Al, Mg 1, Si 0.8, Mn 0.5 (wt%)
- Al, Mg 2.5 (wt%), with Al2O3 (10 vol%)
- Al, Mg 2.5 (wt%), with Al2O3 (5 vol%)
- Al, Mg 4.5, Mn 0.7 (wt%)
- Al, Si 1.2, Mg 0.4 (wt%) (AA6016)
- Al, Si 12, Na 0.02 (wt%)
- Al2O3 50, ZrO2 32, SiO2 15 (wt%), + trace alkalis
- Al2O3 96%, remainder MgO, CaO, SiO2
- Al2O3, C up to 30 (wt%), Si few%
- Amorphous polyethylene terephthalate (APET)
- Araldite CT200/HT907 'matrix' with cylindrical CT200/HT901 'fibre'
- Araldite CT200/HT907 'matrix' with ellipsoid CT200/HT901 'particle'
- Ball clay 30 , china clay 10, potash feldspar 20, silica sand 20, calcined alumina 20 (wt%)
- BaO . 6Fe2O3
- BaTiO3
- BaTiO3 95-97 (wt%)
- Bi 10, Sn 90 (wt%)
- Bi 20, Sn 80 (wt%)
- Bi 30, Sn 70 (wt%)
- Bi 40, Sn 60 (wt%)
- Bi 50, Sn 50 (wt%)
- Bi 60, Cd 40 (wt%)
- Bi 60, Sn 40 (wt%)
- Bi 70, Sn 30 (wt%)
- Bi 80, Cd 20 (wt%)
- Bi 80, Sn 20 (wt%)
- Bi 90, Sn 10 (wt%)
- Blackheart cast iron
- C294H590
- C36H74
- CaO 57, MgO 41 (wt%), + Fe2O3, SiO2 and Al2O3 (typical)
- CaO 57, MgO 41 (wt%), + Fe2O3, SiO2 and Al2O3 (typical)
- Carbon
- Carbon fibre, epoxy resin matrix
- China clay 25, stone 30, bone 45 (wt% typical)
- Co 70, Sm 10, Cu 20 (at%)
- Coating of polypyrrole
- Commercial purity (99.5%)
- Commercial purity (99.5%) + 13 micron alumina spheroids
- Commercial purity (99.5%) + 15 micron angular alumina particles
- Commercial purity (99.5%) + 15 micron angular silicon carbide particles
- Cu 21, Sn 79 (wt%)
- Cu 46, Zn 42, Ni 10, Pb 2 (wt%)
- Cu 50, Zn 50 (wt%)
- Cu 50, Zn 50 (wt%)
- Cu 52, Zn 45 (wt%)
- Cu 52.5, Zn 47.5 (wt%)
- Cu 55, Zn 45 (wt%)
- Cu 60, Zn 40 (wt%)
- Cu 60, Zn 40 (wt%)
- Cu 60, Zn 40 (wt%) + Pb trace
- Cu 65, Zn 35 (wt%) (pure)
- Cu 70, Ni 30 (wt%)
- Cu 70, Sn 30 (wt%)
- Cu 70, Zn 30 (approx), Pb 1.3, Sn 0.5-1.0 (wt%)
- Cu 70, Zn 30 (wt%)
- Cu 70, Zn 30 (wt%)
- Cu 70, Zn 30 (wt%) (pure)
- Cu 80, Sn 20 (wt%)
- Cu 80, Zn 20 (wt%)
- Cu 85, Sn 10, Pb 5 (wt% approx)
- Cu 85, Sn 15 (wt%)
- Cu 85, Sn 5, Zn 5, Pb 5 (wt% approx)
- Cu 88, Sn 8, Zn 4 (wt% approx)
- Cu 89.5, P 10.5 (wt%)
- Cu 90, Sn 10 (wt%)
- Cu 90, Sn 10 (wt%) + P trace
- Cu 90, Zn 10 (wt%)
- Cu 95, Sn 5 (wt%),
- Cu 95, Sn 5, P 0.15 (wt% approx)
- Cu 95, Sn 5, P 0.15 (wt% approx.)
- Cu 95.5, P 4.5 (wt%)
- Cu 98, Be 2 (wt%)
- Cu 99.7 (wt%), some oxygen
- Fe, C 0.07, Mn 2.2 (wt%)
- Fe, C 0.08 (wt%)
- Fe, C 0.1 (wt%)
- Fe, C 0.1, Mn 1, S 0.5 (wt%)
- Fe, C 0.12, Mn 14.2, Cr 13.7
- Fe, C 0.13, Ni 4, Cr 2, Mn 0.49, S 0.015 (wt%)
- Fe, C 0.15 (wt%)
- Fe, C 0.15 (wt%)
- Fe, C 0.15, Mn 1.5, Si 1.5 (wt%)
- Fe, C 0.2 (wt%)
- Fe, C 0.2 (wt%)
- Fe, C 0.2, Mo 4 (wt%)
- Fe, C 0.20, Mo 3.8, Ta 0.22 (wt%)
- Fe, C 0.24, Si 2.18, Mn 2.32, Ni 1.05 (wt%)
- Fe, C 0.3 (wt%)
- Fe, C 0.3 (wt%)
- Fe, C 0.3, Ni 30 (wt%)
- Fe, C 0.31, Ni 3.0, Cr 0.9, Mn 0.6 (wt%)
- Fe, C 0.4 (wt%)
- Fe, C 0.4 (wt%)
- Fe, C 0.4 Ni 30 (wt%)
- Fe, C 0.4, Mn 0.8 (wt%)
- Fe, C 0.4, Ni 1.3, Cr 0.65, Mo 0.65 (wt%)
- Fe, C 0.5 (wt%)
- Fe, C 0.55 (wt%)
- Fe, C 0.55 (wt%)
- Fe, C 0.55, Mn 0.65 (wt%)
- Fe, C 0.6 (wt%)
- Fe, C 0.75 (wt%)
- Fe, C 0.8 (wt%)
- Fe, C 0.85 (wt%)
- Fe, C 0.86 (wt%)
- Fe, C 0.9 (wt%)
- Fe, C 0.9 (wt%)
- Fe, C 1, Mn 2, Si 1.5, Cr 1.3 (wt%)
- Fe, C 1.0 (wt%)
- Fe, C 1.1 (wt%)
- Fe, C 1.15, Mn 13 (wt%)
- Fe, C 1.3 (wt%)
- Fe, C 1.35 (wt%)
- Fe, C 2-4, other constituents (wt% typical) (Cast iron)
- Fe, C 2.10, Si 5.60, Mn 0.50 (wt%) (Silal)
- Fe, C 2.3, Mn 4.0 (wt%)
- Fe, C 2.4, Si 1.1, Mn 1.1 (wt%)
- Fe, C 2.6, Cr 17, Mo 2, Ni 2 (wt%)
- Fe, C 2.8, Ni 4.5, Mn 1.2, Cr 0.75, Si 0.5, P 0.3, Mo 0.25, S 0.1 (wt% typical) (Ni-hard iron)
- Fe, C 2.85, Si 0.33, Mn 0.39, Cr 0.91 (wt%)
- Fe, C 2.95, Si 0.60, Mn 0.60, Ni 4.00, Cr 1.90 (wt%)
- Fe, C 3.0, Si 6, Mn 0.7, P 0.3, S 0.1 (wt% typical) (Silal)
- Fe, C 3.2, Si 2.5 (wt%)
- Fe, C 3.2, Si 2.5, Mg 0.05 (wt%)
- Fe, C 3.4, Si 0.35, Mn 0.22 (wt%)
- Fe, C 3.4, Si 0.35, Mn 0.22 (wt%), + ...
- Fe, C 3.46, Si 0.12, Mn 0.33, P 1.91, Cr 1.02 (wt%)
- Fe, C 3.52, Si 2.51, Mn 0.49, Mo 0.15, Cu 0.31 (wt%)
- Fe, C 3.52, Si 3.26, Mn 0.47 (wt%) (Grey cast iron)
- Fe, C 3.56, Si 0.20, Mn 0.37, Cr 0.91 (wt%)
- Fe, C 3.6, Si 2.1 (wt%)
- Fe, C 3.6, Si 2.1, Mg 0.07 (wt%)
- Fe, C 3.62, Si 0.33, Mn 0.38, Cr 0.89 (wt%)
- Fe, C 4.17, Si 0.40, Mn 0.45, Cr 0.95 (wt%)
- Fe, C low (wt%)
- Fe, C medium (wt%), with small alloy addition
- Fe, C very low (wt%)
- Fe, Mn 1, S 0.02 (wt%)
- Forging steel
- Nd4SrTi5O17
- Ni 53, Fe 19, Cr 18, Nb 5 (wt% approx) + small amounts of Ti, Mo, Co, Al
- Ni, Al, Re, W, Ta, Cr, Co, Ru (Ni-Superalloy)
- Ni, Cr 14.4-15.2, Co 13-18, Mo 3.5-4.5, Al 3.0-3.3, Ti 4.2-4.8, Ta 2.5, Zr 0.05-0.07, C 0.05, B 0.01-0.03 (wt%) (Ni-Superalloy)
- Not specified (System: Al)
- Not specified (System: Si3N4-SiC composite)
- Not specified (System: Fe-C-X)
- Not specified (System: Polyethylene terephthalate (PET))
- Not specified (System: Alumina)
- Not specified (System: Polyhydroxybutyrate (PHB))
- Not specified (System: SiC)
- Not specified (System: Polypropylene (PP))
- Not specified (System: CCcomposite)
- Not specified (System: Cu-P)
- Not specified (System: Low density polyethylene (LDPE))
- Not specified (System: Poly (lactic-co-glycolic acid) (PLGA))
- Not specified (System: Al-Mg-Fe-Si)
- Not specified (System: Polyurethane (PU))
- Not specified (System: Hydroxyapatite (Ca10(PO4)6(OH)2))
- Not specified (System: Nylon)
- Not specified (System: Miscellaneous)
- Not specified (System: Zn)
- Not specified (System: High density polyethylene (HDPE))
- Not specified (System: Oxides + simulated fission products)
- Not specified (System: BaTiO3)
- Not specified (System: Glass fibre composite)
- Not specified (System: Polycarbonate (PC))
- Not specified (System: Na-Cl)
- Not specified (System: C)
- Not specified (System: Polystyrene (PS))
- Not specified (System: Urea formaldehyde)
- Not specified (System: Cu-Sn)
- Not specified (System: Carbon nanotube)
- Not specified (System: BaO-Nd2O3-4TiO2)
- Not specified (System: LAS: Li2O-Al2O3-SiO2)
- Not specified (System: ZTS)
- Not specified (System: SiC fibre-reinforced magnesium aluminosilicate)
- Not specified (Ni-Superalloy)
- Notched zinc
- Semi-flexible LCP, Cl-7
- Semi-flexible LCP, Cl-8
- SiO2 47, B2O3 8, Al2O3 17, MgO 14, K2O 9, F 6 (wt%)
- SiO2, trace of clay
- Soda-lime-silica glaze containing zinc oxide 25, cobalt oxide 0.5 (wt%)
- Stainless steel
- Stainless steel 430
- Stainless steel with Cr 13.7, Mn 14.2, C 0.12 (wt%)
- Stainless steel with Cr 15, Ni 35, Mo 2.5, C 0.25 (wt%)
- Stainless steel with Cr 15, Ni 35, Nb 2.5, C 0.1 (wt%)
- Stainless steel with Cr 15, Ni 35, Nb 5, C O.1 (wt%)
- Stainless steel with Cr 15, Ni 35, Ti 5, C 0.1
- Stainless steel with Cr 15, Ni 35, V 5, C 0.1 (wt%)
- Stainless steel with Cr 18, Ni 10, Mo 1 (wt%)
- Stainless steel with Cr 18, Ni 10, Nb 1 (wt%)
- Stainless steel with Nb 1 (wt%)
© 2004-2013 University of Cambridge.