Technique
87 micrographs for technique Scanning electron microscopy (SEM), ordered by micrograph number.
Showing 81 - 87 of 87 micrographs | Page 1 .. 3 4 5 6 7 8 9 | Previous | Next |
Micrograph
821
:
Austenitic stainless steel impact deformed at room temperature System: Fe-C-X, Composition: Fe, C 1.15, Mn 13 (wt%) Scanning electron microscopy (SEM) 2.5 μm |
|
Micrograph
826
:
Austenitic stainless steel tempered, with Mo2 and M6C precipitates System: Fe-C-X, Composition: Fe, C 0.20, Mo 3.8, Ta 0.22 (wt%) Scanning electron microscopy (SEM) 2.5 μm |
|
Micrograph
831
:
Austenitic stainless steel water quenched, with a-martensite needles within lamellae System: Fe-C-X, Composition: Fe, C 0.12, Mn 14.2, Cr 13.7 Scanning electron microscopy (SEM) 4 μm |
|
Micrograph
834
:
Steel slowly cooled, fracture surface of commercial ingot System: Fe-C-X, Composition: Fe, C 0.13, Ni 4, Cr 2, Mn 0.49, S 0.015 (wt%) Scanning electron microscopy (SEM) 4 μm |
|
Micrograph
849
:
Partially stabilized zirconia (PSZ) powder for plasma spraying System: ZrO2-Y2O3, Composition: ZrO2 92.5, Y2O3 7.5 (wt%) Scanning electron microscopy (SEM) 100 μm |
|
Micrograph
855
:
Low Carbon Steel System: Fe-C-X, Composition: Fe, C low (wt%) Scanning electron microscopy (SEM) 20 μm |
|
Micrograph
856
:
Low Carbon Steel System: Fe-C-X, Composition: Fe, C low (wt%) Scanning electron microscopy (SEM) 5 μm |
Showing 81 - 87 of 87 micrographs | Page 1 .. 3 4 5 6 7 8 9 | Previous | Next |